Straight plug-and-socket connector terminal casing. This style is used in conjunction with circular grooved adaptor, providing protection against environmental stresses. The inside lip has been designed to provide extra reinforced stress relief.

Overview

Hellermann heatshrink moulded shapes combine the advantages of quick, easy installation with high electric strength, mechanical toughness and superior chemical and environmental resistance. Their products offer important functional and cost saving benefits for electrical and electronic applications ranging from insulation and protection of individual components to fabrication of complete inter-connecting cable harness assemblies.

Strain-relieving boots, transitions and connector backshell covers, as well as other specialised shapes are available in a wide range of sizes and options. HellermannTyton's extensive product line includes low profile, bulbous and lipped types for use on circular and D-type connectors as well as complex multiway transitions. Only small number of shapes are needed to cover a full range of applications as the products have high shrink ratios, of up to 5:1.

Features

• Up to 5:1 shrink ratio
• Seals up backshell of connector and provides strain relief when used with HMT200A hot melt tape.

Ordering Details

Straight Boots

Heatshrink Boot. Suits -6 size Autosport Micro Connectors Suits Deutsch Autosport ASL series Micro connectors. Requires hot melt glue (Part # HMT200A) Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -8 and -10 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -12 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -14 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -16 and -18 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -20, -22 and -24 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Right Angle Boots

Heatshrink Boot Right Angle outlet Suits all -8 ad -10 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -12 and -14 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -16 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -16 and -18 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Suits all -20, -22 and -24 size Autosport and Milspec connectors. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Y Transitions

Heatshrink Boot Right Angle outlet Y shaped transition. Inlet is 6mm diameter, outlets are 3mm in fully recovered state. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Boot Right Angle outlet Y shaped transition. Inlet is 12mm diameter, outlets are 6mm in fully recovered state. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Y Shaped Transition Y shaped transition. Inlet is 18mm diameter, outlets are 12mm in fully recovered state. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Tri Y Shaped Transition Tri Y shaped transition. Inlet is 6.5mm diameter, outlets are 3.5mm in fully recovered state. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Tri Y Shaped Transition Tri Y shaped transition. Inlet is 13.5mm diameter, outlets are 7mm in fully recovered state. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>

Heatshrink Tri Y Shaped Transition Tri Y shaped transition. Inlet is 19mm diameter, outlets are 10mm in fully recovered state. Requires HMT200A hot melt glue. Call for Pricing

Checkout >> Read more >>