Overview
The DDU 310-DL32/64 is equipped with a complete range of analogue and digital inputs and ten-page liquid crystal display with configurable windows for an easily configured and personalised screen layout. A graphical bar indicator is typically used for representing engine revs.
A fast Ethernet bus is used for graphical layout load, channels’ configuration and data download. As part of the Magneti Marelli data acquisition and telemetry system, the DDU 310-DL32/64 (with internal data logger) can communicate over a CAN network with a range of additional data loggers receiving and displaying data from the logger as well functioning as an additional input module.
Main Features
• 5 Single-ended
• 1 Pick-ups or Hall effect
• 3 Hall effect
• 32 or 64 Mbyte internal data logger
• Up to 128 logged channels
• Up to 48 Kbyte/s logging rate
• Sampling rates up to 1000 Hz
• Page and channel name labels
• Transmit internal diagnostic over CAN bus
• 48 alarm channels with programmable thresholds
• Display dedicated to 48 internal channels
• Lap time message displayed on dedicated page
• PC interface via Ethernet for loading graphical layout
• Easy to use and configure
• Designed for rugged applications
Stand alone mode
• Direct connection to 11 sensors (active and passive)
• Beacon input for lap time measurement
• Lap total counter
CAN communication
• Partial time (only for SRA DL) up to 16 sections
• Differential time (only for SRA DL) between current partial time and the one of the best lap
Benefits
• TFT 6.2” transflective dot matrix color display
• Graphical engine revolution counter with configurable nonlinear scale
• Alarm condition displays channel name and value (with priorities for multiple alarms)
• Backlight regulation based on internal photocell
• Inputs configurable to suit all sensors in the product range
• 2 push-button on the front panel for page selection, alarm level set, rpm/speed conversions, message hold time
• 6 high-brightness warning lights yellow/red for gear change (with programmable threshold) and 2 blue for general alarm condition indication
• 2 outputs for external warning lamps with short-circuit protections
• Floating point data management
• Pick-up inputs for wheel speed and distance measurement
• Requires Wintax3 analysis software (compatible Win2K/XP)
• Requires Axon logging setup tool
Technical Characteristics
Inputs
Single-ended................................................................ 5
NTC/PT1000 temperature sensor................................ 2
NTC internal temperature sensor ................................ 1
VR Pick-ups or Hall effect (RPM)................................. 1
Hall effect (wheelspeed) .............................................. 3
On/Off digital (page scroll and confirm) ....................... 2
Lap Trigger................................................................... 2
“Code Load” enable pin ............................................... 1
Outputs
Voltage references (@ 5 V) ......................................... 1
Low-side (@ 12 V) ....................................................... 2
Shift Lamp (adjustable brightness) .............................. 6
Alarm (adjustable brightness) ...................................... 2
Communications
CAN line (1 Mbit/s (*)) .................................................. 2
Ethernet line (10/100base T) ....................................... 1
RS232.......................................................................... 1
(*) Configurable on request
Logging
Flash disk memory............................................ 32 or 64 Mbyte
Logged channels............................................. up to 128
Logging rate ...................................................... up to 48 Kbyte/s
Sampling rate................................................ up to 1000 Hz
Other Characteristics
Power supply .................................................... 10 to 18 V
Operating internal temperature........................... 0 to 60 °C
Protection class......................................................IP 65
Transflective dot matrix color display............... TFT 6.2”
Dimensions
without connector ..........................188 x 110 x 34.4 mm
with connector ...............................188 x 110 x 59.2 mm
Weight (approx.) .................................................. 580 g
|
